Incomplete projects for sale

We have four projects for sale that are waiting to be completed by an enthusiastic builder wanting to be on the water sooner rather than later.

Check out our clearance sale price list - all the products you'll need to complete these projects 

Eureka Canoe -  A beautiful example of this elegant Michael Storer touring canoe design.     $ 900

This example has been professionally built with high attention to detail and a clear finish.  She has been sheathed in 85gsm plain weave fibreglass cloth which is virtually invisible under a lustrous coating of Bote Cote epoxy.  She just needs final fairing and painting with Aquacote Clear topcoat, and fitting of outer gunwales, seats, cross-brace and hatch covers.  The complete kit normally costs $1680.  Then you add your valuable labour.  Over 50 hours of professional labour have gone into this project, so she's a bargain at just $1590 including materials to finish her off:  Hoop Pine for seats and cross brace, Bote Cote Epoxy (750ml kit) and Aquacote top coat (500ml). Note: Round 100mm hatch covers (2 required) are not included.

Michael Storer Eureka Canoe - complete panel set epoxy coated        $299

A professionally cut and coated set of Eureka canoe panels, ready to be assembled.  Pre-drilled along the panel edges, all you have to do is stitch and glue them together, glass and paint.  Plans book included. Bote Cote Epoxy, powders, glass and paint to finish can be supplied separately.  

Joey dinghy - A wonderful, simple row/sail/motor pram dinghy      $899

This example has been built by us as a demonstration model.  She is complete except for the final painting and hatches. The plans + materials kit costs $811.  The fully cut kit costs $1150.  We' put over 60 hours effort into this project, so you'll save yourself alot of effort but at the same time be able to give her your personal touch.  Many of the panels can be left clear finished if you choose, such is the level of attention to detail.  

National E 15' classic sailing boat         $499

A partially restored 1970's class sailing boat.  We have removed all the old varnish and given her a light sand.  Centre board case has been removed for repair or to use as a template for a new one.

Beautiful Blackwood ply hull, ready to be sheathed in light glass + Bote Cote epoxy  for protection and durability.  Trailer, mast (and sails if available) included.  Deceased estate.

Foredeck spray rail.  A little dusty (oops!)  Floatation boxes, c/b case, c/b, seats, rudder - stripped and ready to finish.

Interior completely stripped and sanded.     Hull all stripped. Very minor dings to fill, then glass and clear finish.